Instruction on how to assemble our beds
All components which joints must be done
are either numbered or lettered:
"A to A", " B to B", " C to C" or "1 to
1", etc.
1) Stand the headboard and footboard up,
carefully secure them by someone or something.
(CAUTION: falling of the piece will damage to the piece and the surroundings.)
2) Hook the left & right rails between head & footboard, then insert bolts provided for a few turns without tightening, place the two main mattress support in between for a King size bed, or one support only for Queen size bed.
3) Tighten all joints with bolts provided.
4) Follow the number or letter, place slats
across in position.
5) Finish by putting the mattress on the
bed.
Congratulation!
Enjoy the new bed with sweet dream!
Enjoy!